PRODUCTS

Impact Tester Systems – Model ITB15A

Standard: IEC 60065; IEC 60601; IEC 61010; IEC 61032; IEC 60950

Read More

Leverage our experience with designing and fabricating a complete impact test system.  Do not waste time trying to figure out all the components required to perform the testing, and eliminate any uncertainty that the test complies with the standard testing requirements.  Ergonomics offers a turnkey solution that can be used for testing immediately upon delivery.

Impact Test Ball (50mm Diameter) – Model ITB15

Standard: IEC 60601-1:2005, 15.3.3; IEC 61032:1998, Figure 5 Test Probe 1; IEC 60950, Section 4.2.5 Figure 4A; IEC 61010-1, Clause 8.2.1; IEC 61010-1:2001, Figure 4; IEC 60065, Figure 4

Read More

This 50mm diameter Impact Test Ball weighing 500 grams is a specially machined ball to test impact resistance according to IEC standards below, as well CSA and UL standards. It is made of chrome-plated steel for durability, and is fitted with an eyelet to facilitate testing for pendulum applications.  Ergonomics can also supply this ball

UL Metal Articulated Probe – Model ULP20-68

Model: ULP20
Standard: Standard:IEC 62368-1, Figure V.1; CSA C22.2 No47-13, Figure 1; ANSI Z21.88-2017, Figure 8, Accessibility Probe; CSA 2.33-2017, Figure 8, Accessibility Probe; UL PA100A (M); UL 1492, Figure 18.1

Read More

The UL Metal Articulated Probe is a standard articulated finger as required by Underwriters Laboratories in many of their standards. It is a jointed test probe specifically designed to test equipment likely to be accessible by children. This probe also applies to more stringent international standards for hazardous parts access, such as IEC 62368-1. The

UL Metal Rigid Finger Probe – Model ULP25

Standard: Standard:IEC 62368-1, Figure V.1; CSA C22.2 No47-13, Figure 1; ANSI Z21.88-2017, Figure 8, Accessibility Probe; CSA 2.33-2017, Figure 8, Accessibility Probe; UL PA100A (M); UL 1492, Figure 18.1

Read More

The UL Metal Rigid Probe is a highly accurate probe made in accordance with all the IEC, UL and International Standards listed below. It is a probe specifically designed to test equipment likely to be accessible by children. This rigid probe is made for forceful insertion where the flexibility of the UL Metal Articulated Probe,

UL Plastic Articulated Probe – Model ULP04

Model: ULP04

Read More

The UL Plastic Articulated Probe is a standard articulated finger as required by Underwriters Laboratories in many of their standards. It is a jointed test probe specifically designed to test equipment likely to be accessible by children. The design is made of high quality, durable Delrin plastic, offering a more economical version to meet the

Gasket Test Apparatus: 50E GT

Model: 50E GT
Standard: J 335/2-ANCE; UL50E; CSA22.2 No. 94.2

Read More

The Gasket Test Apparatus is used to check the integrity and endurance of gasket materials used in a Type 2, 3, 3Rm 3S 4, 4X 5, 6, 6P 12, 12K or 13 enclosures. The requirements are listed in clause 8.13.3.3 and is referenced as the Compression Test Gaskets used on enclosures for electrical equipment. The

Jointed Children’s Finger Probe

Model: UL1017
Standard: UL1017

Read More

This is a precision probe made in accordance with UL1017 and related standards.

Rigid Sphere, 1/2 inch mm

Model: ITB50
Standard: U.S.

Read More

For U.S. standards.

Test Rod Probes


Read More

Several models to choose from… To test to many IEC standards and UL standards.

Screw-base Lamp Gauge

Model: SBL100
Standard: UL 588

Read More

The Screw-Base Lamp Gauge is designed to evaluate live parts of intermediate screw-base lamps. It is made of stainless steel. This gauge meets UL 588 standard.

Rubber Ball for Dynamic Stability – 2.187 inch

Model: ITB82
Standard: UL 1082, Figure 46.1

Read More

Rubber ball used for dynamic stability testing to UL (USA) standards.

Impact Test Ball (2.0 Inch Diameter) – Model ITB2

Model: ITB2
Standard: UL250

Read More

This 2.000 inch diameter Impact Test Ball weighing 535 grams is a specially machined ball to test impact resistance according to International Standards and UL 250. It is made of chrome-plated steel for durability, and is fitted with an eyelet to facilitate testing for pendulum applications.  Ergonomics can also supply this ball without an eyelet

Enamel Wire Probe

Model: EWP25
Standard: UL

Read More

Used for testing to many UL Standards checking access to enamel coated wire.

Enamel Wire Probe

Model: EWP10
Standard: Test Probe UL PA140A; UL250 - Figure 4.2; UL 471, Figure 5.3

Read More

UL Test for access to enamel coated wire.

Moving Parts Probe

Model: MPP507
Standard: UL PA 160; UL507, Figure 8.1; UL 471, Figure 5.1

Read More

The Moving Parts Probe is used in UL 507 to test for hazards from moving parts.

Coin Probe

Model: CP10
Standard: UL 1410 and 6500

Read More

4 coins in one – checks access by US coins. UL Standard

Custom Simulated Foot Probes

Model: FP11 | FP10 | FP09
Standard: IEC 60335-2-107; IEC 60335-2-92; EN 50636-2-107, Figure 102

Read More

The standard requires rotary power mowers to have protective shields. These shields prevent the operator’s foot from contacting the blade, either under the mower’s deck or in the discharge chute area, when the operator has his or her hands on the mower’s controls. Generally, a shield must prevent a foot probe from entering the path

Blunt Probe

Model: BP10
Standard: UL 1310

Read More

The Blunt Probe is used in UL 1310 Standard for Class 2 Power Units.