PRODUCTS

6

Test Pin Probe TPP15

Model: TPP15

Read More

The Test Pin Probe is used to test for accessibility of small objects and meets IEC, CSA and UL requirements. The probe is made of stainless steel with a Delrin® handle. Meets IEC 60950 and 61032, Figure 9 (Test Probe 13).

50E GT

Gasket Test Apparatus: 50E GT

Model: 50E GT
Standard: J 335/2-ANCE; UL50E; CSA22.2 No. 94.2

Read More

The Gasket Test Apparatus is used to check the integrity and endurance of gasket materials used in a Type 2, 3, 3Rm 3S 4, 4X 5, 6, 6P 12, 12K or 13 enclosures. The requirements are listed in clause 8.13.3.3 and is referenced as the Compression Test Gaskets used on enclosures for electrical equipment. The

IMG_1242

Incline Plane Model IP01

Model: IP01
Standard: 60950

Read More

Incline Plane — Model IP01     The Incline Plane, Model IP01, has been developed in accordance with established product safety standards.  Standards such as IEC 60950 and others require product testing at an incline of either 10 or 15 degrees.  Test surface is 900 X 870 mm and close to floor for easy access

ITB2A

Impact Tester Systems — ITB2A and ITB15A

Model: ITB2A
Standard: IEC 60065, 60950

Read More

The Impact Tester System, Models ITB2A and ITB15A, have been developed in accordance with product safety standards IEC 60065 and IEC60950 and can be used for many other applications. It is used to determine the effectiveness of insulating enclosures and barriers and anywhere the robustness of mechanical assemblies is important. ITB2A includes an ITB2 (2″)

F22.50

Universal Impact Hammer — Model F22.50

Model: F22.50
Standard: IEC 60068-2-75, 60065, 60335, 60598, 60601, 61010

Read More

The Universal Impact Hammer is designed to perform impact tests for product durability. The F22.50 meets the testing needs of industry standards such as IEC 60068-2-75 and required by IEC 60065, 60335, 60598, 60601, 61010 and others. The hammer simulates mechanical impact to electronic products and electrical appliances. This impact hammer is versatile – Five

sih10-lg

Single Energy Impact Hammers

Model: SIH10, SIH200

Read More

Choose one level between 0.2 to 2 Nm (joules) Designed to perform impact tests for product durability. Simulates mechanical impact to electronic products and electrical appliances.

5811

Friborg Fall Down Tester

Model: 5811
Standard: IEC 60335-2-3

Read More

This equipment tests the mechanical stability of fixing the thermostats in electric irons. This stability is tested by allowing the unit to fall down 200 times on a steel support.

Model MGP800

Pushing Surface

Model: MGP800
Standard: IEC 60950

Read More

Used in IEC 60950 series standards. Recommended to be used with the swivel adaptor G1018-1

G1018-1

Swivel Adaptor

Model: G1018-1

Read More

Used with force gauges and test fixtures to achieve proper alignment. It relieves stresses to the gauge. Can be used with MGP30 and MGP800 and all gauges having the same threads.

MGP30

30 mm Disc for Force Gauge

Model: MGP30
Standard: IEC 60950

Read More

Delrin® disc for testing to IEC 60950.

RTH10

Rigidity Test Hemisphere

Model: RTH10
Standard: IEC 61010

Read More

IEC testing of rigidity of enclosures. IEC 61010 Used with force gauges and other applications.

WT3-200

Wire Terminal Tester

Model: WT3-200

Read More

The WT3-200 wire terminal pull tester is designed to measure the pull-off force of wire and tube terminations.

7202

Flexing Test for Cords

Model: 7202

Read More

The flexing test checks how much the bending movement of the cord influences the electrical and mechanical connection.

Model 7200

Flex Tester for Plugs

Model: 7200
Standard: IEC

Read More

The cord set or plug with mains cord are subjected to a flexing test to control how much the bending movement of the cord influences the electrical and mechanical connection.

Model 7000

Friborg Torque Withdrawal Test

Model: 7000
Standard: IEC - 335-1, Clause 25.11

Read More

Tests the fixing of mains cord. This equipment is divided into two types: one for the torque test and one for the withdrawal test.

Friborg Torque Tester -- Model 5500

Friborg Torque Tester

Model: 5500

Read More

This torque test is for components with a one-part AS plug design. It measures the actual torque from the plug connection with a balance.

5200

Friborg Bump Tester

Model: 5200
Standard: IEC: 65, clause 12.11

Read More

The purpose of this tester is to generate fall down tests of, for instance TV sets and appliances. The principal is that the TV set is standing on a platform which falls down 50mm rapidly. The TV set has a free fall of 50mm.

Cold Bend Test For Conduits

Cold Bend Test For Conduits

Model: 5130

Read More

Insulation conduits are cold bend tested to control how low temperatures influence the ability to bend them without damaging them.

Single Energy Impact Hammers

Single Energy Impact Hammers

Model: SVH20
Standard: IEC 60068-2-75

Read More

Choose one level between 0.2 to 1 Nm (joules) Made in America

Universal Impact Hammer

Universal Impact Hammer

Model: UIH20
Standard: IEC 60065, 60335, 60598, 60601, 61010

Read More

Able to select all energies from 0.14 to 1 Nm. Precision calibration is supplied with the unit. Meets all new requirements.

Ergonomics Motorized Sharp Edge Tester

Ergonomics Motorized Sharp Edge Tester

Model: SE250
Standard: EN-71 1998 8.2, 16 CFR 1500.48 / ASTM F963 4.8, GB 6675-2003 A.5.9

Read More

Used to test edges on toys and other products. Required for toy safety testing.

CAP50

Ergonomics Replacement Caps

Model: CAP50
Standard: UL1439

Read More

Box contains 50 Tape Caps. Fits all manufacturers’ testers. Cap construction is explained on the data sheet.

FullSizeRender

Ergonomics Sharp Edge Tester Kit

Model: SE400K
Standard: UL 1439

Read More

Test instrument and 50 Tape Caps for testing sharp edges. See data sheet for explanation.

Ergonomics Creepage Gauge Set

Ergonomics Creepage Gauge Set

Model: CGS32

Read More

The Gauge Set measures creepage and clearance distances, distances through insulation and other spacings.

Com20

Caliper and Micrometer Set

Model: COM20

Read More

Measures distances through insulation and other safety-related distances as required by all safety standards.

Ergonomics Optical Comparator

Ergonomics Optical Comparator

Model: COM10

Read More

Used for measuring distances between printed wiring traces, and distances through insulation.

ESM301

Mark-10 Motorized Test Stand with PC Control

Model: ESM301, ESM301L

Read More

The ESM301 and extended length ESM301L are highly configurable motorized test stands for tension and compression testing applications up to 300 lbF (1.5 kN) for laboratory and production environments.

ES20

Mark-10 Test Stand for use with force gauges

Model: ES20

Read More

The ES20 manual test stand is a compact and economical solution for compression and tensile testing of small samples. The use of a hand wheel provides for more precise testing with greater consistency in testing results.

Mark-10-Digital-Torque-Gauges-–-Series-TT03

Mark-10 Digital Torque Gauges – Series TT03

Model: TT03 Series

Read More

Series TT03 digital torque gauges are designed for clockwise and counter-clockwise torque testing applications in virtually every industry, with capacities from 10 ozFin to 100 lbFin (7 to 1,150 Ncm).

Series-7-Hand

Mark-10 Series 7 Force Gauge

Model: M7 Series

Read More

Series 7 professional digital force gauges are designed with a number of sophisticated features for the most demanding tension and compression measurement applications, up to 500 lbF (2500 N).

Series-5-Hand

Mark-10 Digital Force Gauges – Series 5

Model: M5 Series

Read More

Series 5 advanced digital force gauges are designed for tension and compression force testing in numerous applications across virtually every industry, with capacities from 0.12 lb to 500 lb (0.5 N to 2500 N).

Series-4-main

Mark-10 Digital Force Gauges – Series 4

Model: M4 Series

Read More

Series 4 digital force gauges are designed for tension and compression force testing in numerous applications across virtually every industry, with capacities from 0.12 lb to 500 lb (0.5 N to 2500 N).

Series-3-Hand

Mark-10 Digital Force Gauges – Series 3

Model: M3 Series

Read More

Series 3 digital force gauges are designed for tension and compression force testing in numerous applications from 0.12 lbF to 500 lbF (0.5 N to 2500 N).

Screw-base Lamp Gauge

Screw-base Lamp Gauge

Model: SBL100
Standard: UL 588

Read More

The Screw-Base Lamp Gauge is designed to evaluate live parts of intermediate screw-base lamps. It is made of stainless steel. This gauge meets UL 588 standard.