
ERGONOMICS,INC.
Select a Product:
GET A QUOTE!
Ergonomics Inc.
PO Box 964
Southampton, PA 18966
800-862-0102
215-357-5124
Fax: 215-364-7582
info@ergonomicsusa.com
|
AC Current Probe -- Model SR601
The current
transformer extends the capability of the Combinova Power Analyzer.
Has excellent accuracy, frequency response and phase shift up to 1000 Amperes AC. (Can also be used as a stand-alone unit with a standard
current meter.)
ELECTRICAL SPECIFICATIONS
Current Range: 0.1 to 1000 A AC, continuous cycle
- Transformation Ratio: 1000:1
- Output Signal: 1mA AC/A AC (1 A AC @ 1000 A)
- Accuracy and Phase Shift*:
- Primary Current 50A 200A 1000A
- Accuracy % of Reading 0.7% 0.6% 0.5%
- Phase Shift 1.5º 0.75º 0.5º
- Overload: 1200 A for 30 mn
- Accuracy: per IEC 185
- Frequency Range:
30 Hz to 10kHz, current derating above
5 kHz for continuous use
- Load Impedance: 5 ohms maximum
- Working Voltage: 600 Vrms
- Common Mode Voltage: 600 Vrms
- Open Secondary Voltage: <20 V by limiting circuit
- Influence of Adjacent Conductor: <0.2 mA/A AC
- Influence of Conductor in Jaw Opening: 0.02% of reading
MECHANICAL SPECIFICATIONS
- Operating Temperature: -13º to 122º F (-25º to 50º C)
- Storage Temperature: -40º to 176º F (-40º to 80º C)
- Temperature Influence: <0.1% per 10º K
- Jaw Opening: 2.13 inches (54 mm) maximum
- Maximum Conductor Size: 2.09 inches (53 mm)
- Envelope Protection: IP 20 (IEC 60529)
- Drop Test: 1 m (IEC 60068-2-32)
- Mechanical Shock: 100 G (IEC 60068-2-27)
- Vibration: 10/55/10 Hz, 0.15 mm (IEC 60068-2-6)
- Polycarbonate Material:
- Handles: 10% fiberglass charged polycarbonate
- UL 94 VO Jaws: ABS UL 94 V2
- Dimensions: 4.13 x 8.1 x 1 1.89 inches (105 X 206 X 48 mm)
- Weight: 1.43 lbs. (650 g)
- Colors: Dark gray handles with red jaws
SAFETY SPECIFICATIONS
- Electrical: Double insulation or reinforced insulation between primary or secondary and outer case of handle per IEC
61010
- Common Mode Voltage:
- 600 V Category III, Pollution: 2
- 300 V Category IV, Pollution: 2
- Electromagnetic Compatibility (CE Mark):
- EN50081-1 Class B
- EN50082-2 Electrostatic discharge, IEC 1000-4-2
- Radiated field IEC 61000-4-3
- Fast transients IEC 61000-4-4
- Magnetic field at 50/60 Hz IEC 61000-4-8
Contact us for a quote!
Back

© Ergonomics Inc. - all rights reserved
|